CT2019 Bar-Height Self-Leveling Base

The FLAT Tech CT2019 is a Bar-Height Self-Leveling Base for busy bars and high-top areas. This Bar-Height Self-Leveling Base keeps tables level on uneven floors and helps nearby tabletops line up at the same height for clean joins.

At a Glance

Type: Bar-height self-leveling table base. Finish: Textured black. Column: 3 inch round. Footprint: 22 in × 22 in cross style. Technology: FLAT PAD leveling. Top size: Up to 24 in square or 26 in round. Best for: Bars, cafés, and elevated seating.

Bar-Height Self-Leveling Base: Steady, Simple, Reliable

First, the CT2019 keeps all feet in firm contact with the floor. Next, the internal fluid system adjusts as you place the table so it stays level. Then, when you push two tables together, the tabletops meet evenly. As a result, you get fewer wobbles, fewer spills, and faster turns.

Top Size and Compatibility

Recommended top sizes: up to 24 inch square or 26 inch round
Top materials: solid wood, composite, or stone with proper inserts
Mounting: standard top plate; tabletop screws sold separately

Also, these ranges fit most bar-height two-tops and many tight four-tops. However, if you use heavy or extra-thick tops, confirm insert plans and fasteners that match your thickness and span.

Where This Base Shines

High-top rails and bar sections that need steady support
Older floors or covered patios with small height changes
Layouts that join tables for groups and need flat seams

If you need dining height, see the CT2007. Need a wider stance, compare CT2056 or CT2031. For heavier bar tops, look at CT2087. To match other bar-height zones, pair with the CT2016.

Installation Notes

First, assemble the column, plate, and base on a flat surface. Next, fasten the tabletop with the approved pattern and inserts. Then, set the table on the floor and let the feet settle. Finally, slide into place and check that joined tops meet evenly.

Pro Tip

Mark common join spots on the floor for four- and six-top setups. This speeds resets and keeps seams even during peak hours.

Specifications

Model: FLAT Tech CT2019 (KX22)
Style: Bar-height cross base
Finish: Textured black
Column: 3 inch round
Leveling: FLAT PAD self-leveling system
Recommended top: Up to 24 inch square or 26 inch round
Fasteners: Sold separately; select for your tabletop material

In short, these specs fit most bar-height needs. If you plan heavy builds, check the plate pattern and inserts against your top plan.

Care and Maintenance

First, wipe with a damp microfiber cloth and mild detergent. Next, avoid harsh solvents that dull the finish. Finally, check fasteners and feet on a set schedule, especially after moves.

Did You Know?

Self-leveling feet cut down on shims and coasters. That saves time each night and keeps sections consistent for guests.

Request More Info Now!

Other Table Base Options

Match stability and mobility to each section:

FLAT Tech CT2007 for dining height
FLAT Tech CT2056 for larger rectangular tops
FLAT Tech CT2016 for other bar-height zones
FLAT Tech CT2031 for extended rectangular layouts
FLAT Tech CT2087 when wider support is needed

Featured Answer

Which Restaurant table bases are best for bar-height layouts?

A Bar-Height Self-Leveling Base like the CT2019 keeps tops steady and lined up on floors that are not perfectly flat. For bigger tops, consider CT2087 for a wider stance.

Why Order From TimeWorn Wood

Pair the CT2019 with our solid wood restaurant tabletops. We size, pre-drill, and finish tops for daily use, then crate and ship nationwide. We also help match plate patterns and inserts to your top thickness and species.