Solid Wood Restaurant Tabletops
Handcrafted in Minnesota from premium American hardwoods. Built for the demands of daily restaurant service, with lasting beauty and commercial-grade durability.
18 Years of Craftsmanship. Over 55,000 Restaurant Tabletops Shipped.
Handcrafted in Minnesota with commercial-grade durability, a SEFA-8 tested finish, and typical manufacturing lead times of just 3–4 weeks.
Seen in service. Same wood, same finish, same shop. Tables, bar tops, shelves and boards built to match.
TimeWorn tabletops are built from 100% American-sourced lumber, milled in-house, and finished to stand up to hot plates and daily wipes. Choose your tabletop style, wood species, and stain color. We will build with consistent craftsmanship, distinctive natural character, and long-lasting quality.
Typical pricing: $140–$280 for a 24″ × 24″ tabletop, depending on wood species, style, and customization options.
Choose Your Table Top Style
Every TimeWorn tabletop style is defined by three things: thickness, stave width, and texture. Choose the style that best complements your restaurant’s interior, then select your preferred wood species and stain color.
Classic Restaurant Tabletops
THICKNESS: 1 1/2 inch | STAVE: 1 1/4 inch | TEXTURE: Smooth, edge grain, quarter-sawn
Balanced staves with clean grain. Our most economical tabletop category, and a practical choice for multi-location rollouts that need a consistent look.
All Classic Restaurant Tabletops
Explore all Classic Restaurant Tabletops below. Select any image to view its wood species, stain color, and available customization options.
Butcher Block Restaurant Tabletops
THICKNESS: 1 3/4 inch | STAVE: 3/4 inch | TEXTURE: Smooth, edge grain, quarter-sawn
Tight, narrow edge grain. Calm, uniform, and stable
All Butcher Block Restaurant Tabletops
Explore all Butcher Block Restaurant Tabletops below. Select any image to view its wood species, stain color, and available customization options.
Distressed Restaurant Tabletops
THICKNESS: 1 1/2 inch | STAVE: 1 1/2 – 1 3/4 inch | TEXTURE: Smooth to the touch, edge grain, quarter-sawn
Subtle hand-applied character and softened edges. Hides daily wear without feeling rough.
Wide Plank Restaurant Tabletops
THICKNESS: 1 5/8 inch | STAVE: 2 to 5 inch | TEXTURE: Smooth & flat sawn
Wider staves showcase the natural grain patterns and character of solid hardwood. An excellent choice for restaurants seeking a bold, distinctive appearance.
Rustic Texture Restaurant Tabletops
THICKNESS: 1 5/8 inch | STAVE: 2 to 6 inch | TEXTURE: Rustic texture, fully filled and finished for easy cleaning.
Distinctive saw marks and natural character, available in both reclaimed and new lumber. Carefully sanded and sealed for a service-ready surface.
Reclaimed Standard Plank Restaurant Tabletops
THICKNESS: 1 3/4 inch | STAVE: 1 1/2 to 2 inch | TEXTURE: Smooth, reclaimed, edge grain, quarter-sawn
Reclaimed barn wood, kiln dried and quarter sawn. Old growth stability with natural variation and a real story.
Plan your dining room
Restaurant Tabletop Sizes and Seating
Choose tabletop dimensions based on guest count, chair size, table bases, and circulation space. Allow roughly 18 inches per guest for quick service or 24 inches for more spacious dining. Plan aisles of at least 36 inches as a general starting point, and confirm applicable accessibility requirements. Flexible two-tops and convertible tables help accommodate changing party sizes.
Common Tabletop Sizes
| Table | Typical Size | Seats |
|---|---|---|
| Two-Top (rectangular) | 24 × 24 or 24 × 30 inches | 2 |
| Four-Top (rectangular) | 30 × 48 or 30 × 54 inches | 4 |
| Flexible Drop-Leaf | 36 × 36 inches to 51 inches round | 4 to 6 |
| Round | 36 to 48 inches in diameter | Typically 3 to 6, depending on diameter |
| Booth | Custom to booth width and depth | Varies |
For detailed seating plans, see our Restaurant Table Tops Buyer's Guide. Read more about accessibility considerations and drop-leaf configurations. Explore compatible Restaurant Table Bases.
Explore wood species
Best Wood Species for Restaurant Tabletops
Every species can be customized to complement your restaurant. Compare the natural color, grain, durability, and character of each wood.
Walnut
Exceptionally versatile for high-end restaurants, from refined dining rooms to modern steakhouses. Its rich brown tones and distinctive grain bring warmth and sophistication to nearly any upscale design.
White Oak
Extremely hard and durable, with a versatile natural color that complements a wide range of interiors. Its natural color tone helps conceal everyday wear, making it an excellent choice for virtually any restaurant setting.
Maple
Exceptionally hard, heavy, and durable. Its neutral color works with almost any design, while its neutral color does an excellent job of hiding everyday wear in busy dining environments.
Cherry
Warm reddish-brown color complements traditional restaurants and inviting dining rooms. Over time, cherry naturally darkens to a deep, rich brown-red, adding depth and beauty as it ages.
Reclaimed Oak and Pine
Weathered character is a natural fit for breweries, bars, and rustic spaces, with authentic character such as nail holes, dark age spots, and other marks of its history that give each tabletop an individual appearance.
You can also mix species by area, such as walnut in the dining room and reclaimed oak at the bar, while coordinating stain colors throughout.
Made for commercial spaces
Built for Daily Restaurant Service
With 18 years of experience and more than 55,000 restaurant tabletops shipped, TimeWorn manufactures solid wood surfaces for the demands of commercial dining. Our tabletops are precision-machined and protected with M.L. Campbell’s Polarion acrylic polyurethane, a commercial-grade finish tested for chemical resistance under SEFA-8 standards.
For approved cleaning products and maintenance guidance, see our Care and Cleaning Guide.
From concept to delivery
Planning Your Restaurant Tabletop Project
Tell us your dimensions, preferred species, stain colors, quantities, and opening schedule. We'll help translate your design into a detailed quote.
- Compare samples. Request an 8 inch by 8 inch sample to evaluate material selections, texture, and stain colors in your space.
- Confirm production and delivery. Typical manufacturing lead time is 3 to 4 weeks after signed contract and deposit, with transit time additional. We coordinate nationwide freight and can discuss rush requests early in the project.
- Specify custom details and add-ons. Explore edge profiles, bands, cutouts, grommets, logos, and coordinating products on our Tabletop Enhancements page, including options to complement your restaurant with wood restaurant shelves and charcuterie and serving boards.
Ready to get started?
Request a quote for your sizes, quantities, wood species, and stain colors. Still deciding? Ask us about samples.
Request a Quote →Helpful resources: Restaurant Table Tops Buyer's Guide · Our Process · Drop-Leaf Tables · Bar Tops · Communal Tables · Restaurant Table Bases · Case Studies · Request a Quote · FAQ
FAQs
What makes TimeWorn restaurant tabletops different from mass-produced tables?
Each tabletop is made from 100% American-sourced solid wood, crafted by skilled woodworkers, and protected with M.L. Campbell’s Polarion acrylic polyurethane, a commercial-grade finish tested for chemical resistance under SEFA-8 standards. Learn more about our process.
Can you build custom sizes or shapes?
Yes. We manufacture custom tabletop sizes, shapes, edge profiles, and cutouts. Send us your dimensions through our quote request form, and we’ll help determine what works for your seating and table bases. You can also explore our Tabletop Enhancements.
Do you offer a finish tested for heat, chemical, and scratch resistance?
Yes. Our M.L. Campbell’s Polarion acrylic polyurethane finish has been tested for chemical resistance under SEFA-8 standards, with additional scratch-resistance testing through M.L. Campbell. We have also conducted our own tabletop heat-resistance tests and published the results. Read our tabletop heat-testing results and see our Care and Cleaning Guide for approved cleaning products and recommended care.
How long will it take to receive my custom tabletops?
Typical manufacturing lead time is 3 to 4 weeks after we receive your signed contract and deposit. Shipping and delivery time are additional. Rush orders may be available upon request, so please contact us early if you have a scheduled opening date.
Can I get matching bar tops or communal tables?
Yes. We manufacture matching restaurant bar tops and communal tables. We also offer coordinating wood restaurant shelves and charcuterie and serving boards for a cohesive restaurant interior.
Do you ship nationwide?
Yes. We ship throughout the United States using custom-built protective freight crates and coordinated delivery. International shipping is also available.








