CT2031 End-Style Self-Leveling Base

The FLAT Tech CT2031 is an End-Style Self-Leveling Base set for long bar-height tables in busy restaurants and bars. It uses two 22 inch end bases with a leveling system that helps keep tops stable and even on uneven floors.

At a Glance

Type: Dual end-base set, bar height. Finish: Textured black. Columns: 3 inch round. End bases: 22 inch. Leveling: FLAT PAD system. Best for: Long rectangular or oval tops that need steady support and clean joins.

End-Style Self-Leveling Base Advantages

First, the two end bases spread the load so long tops feel solid. Next, the feet adjust on contact with the floor to remove wobble. Then, when you push two tables together, the edges meet more evenly. As a result, guests get a smooth surface and staff can reset faster.

Top Size and Compatibility

Recommended formats: long rectangular or oval bar-height tops
Materials: solid wood, composite, or stone with approved inserts
Mounting: 13 inch by 13 inch plates; select screws for your material

In most bar areas, these ranges cover common layouts. However, if your top is heavier or wider than usual, confirm the plate pattern and insert plan before install.

Where This Base Shines

Bar-height communal tables that need open legroom
High-traffic sections that join tables for large groups
Older rooms or covered patios with slight floor changes

For dining-height singles, see CT2007 or CT2006. Also, if you need a bar-height single, use CT2016. For wider spans and added mass, explore CT4206. Finally, for square heavy-use tops, consider CT2061.

Installation Notes

First, mark centerlines and end spacing under the top. Next, attach plates with approved inserts and screws. Then, stand the table, let both bases settle, and check that joined seams sit flush. Finally, confirm aisle widths and foot clearance before service.

Pro Tip

Dry-fit with painter’s tape before drilling. Small shifts can improve chair pull-out, wheelchair access, and server paths.

Specifications

Model: FLAT Tech CT2031 dual end-base set
Style: Bar height, two-base configuration
Finish: Textured black, cast iron
Columns: 3 inch round
Leveling: FLAT PAD self-leveling
Recommended use: Long rectangular or oval tops
Fasteners: Select per substrate

Overall, these specs suit bar-height communal layouts. If your top exceeds common sizes or weight, check insert layout and plate fit early.

Care and Maintenance

Clean with a damp cloth and mild soap. Also, avoid harsh solvents. In addition, check fasteners on a set schedule, especially after moves. After each reset, let the feet settle so seams stay even.

Did You Know?

Two end bases often reduce shim use along the full length of a long top. That keeps the surface flatter and speeds nightly resets.

Request More Info Now!

Other Table Base Options

FLAT Tech CT2007 – dining-height self-leveling
FLAT Tech CT2016 – bar-height self-leveling
FLAT Tech CT2006 – compact dining option
FLAT Tech CT4206 – wide-span heavy-duty
FLAT Tech CT2061 – square-table setup

Featured Answer

Which Restaurant table bases work best for long bar-height tabletops?

Try an End-Style Self-Leveling Base set like CT2031. It improves stability, cuts wobble, and helps seams sit flush when tables are joined.

Why Order From TimeWorn Wood

Pair CT2031 with our solid wood restaurant tabletops. We size, pre-drill, and finish each top for daily use. We also crate and ship nationwide. Finally, we help you match plate patterns and insert plans for large formats.