Large Bar-Height Table Base

The FLAT Tech CT2036 is a Large Bar-Height Table Base built for oversized tabletops in busy restaurants and bars. It uses a wide 36 inch cross base and a 4 inch column with a leveling system that helps keep tops stable and even on uneven floors.

At a Glance

Type: Bar-height cross base. Finish: Textured black. Column: 4 inch round. Footprint: 36 inch by 36 inch. Leveling: FLAT PAD system. Best for: Large round or square tops that need steady support and clean joins.

Large Bar-Height Table Base Advantages

First, the wide footprint resists wobble so big tops feel solid. Next, the feet adjust on contact with the floor to remove shake. Then, when you push two tables together, the edges meet more evenly. As a result, guests get a smooth surface and staff can reset faster.

Top Size and Compatibility

Recommended formats: large round or square bar-height tops
Materials: solid wood, composite, or stone with approved inserts
Mounting: large top plate; select screws for your material and thickness

In most bar areas, these ranges cover common layouts for wide tops. However, if your top is heavier than usual, confirm the insert plan and plate pattern before install.

Where This Base Shines

Bar-height sections that need a strong center base
High-traffic zones that join tables for large groups
Older rooms or covered patios with slight floor changes

Compact dining-height alternatives include CT2070, CT3012, and CT3006. You can explore proper sizing in the Selecting Restaurant Table Size guide. To improve your overall layout, review 6 Steps to Help Design Your Restaurant Seating Plan.

Installation Notes

First, mark centerlines on the underside of the top. Next, attach the plate with approved inserts and fasteners. Then, place the table upright, let the feet settle, and check that joined seams sit flush. Finally, confirm aisle widths and foot clearance before service.

Pro Tip

Dry-fit with painter’s tape before drilling. Small shifts of the base can improve chair pull-out, guest knee room, and server paths.

Specifications

Model: FLAT Tech CT2036
Style: Bar height cross base
Finish: Textured black, cast iron
Column: 4 inch round
Leveling: FLAT PAD self-leveling
Recommended use: Large round or square tops
Fasteners: Select per substrate

Overall, these specs suit bar-height layouts that use larger tops. If your build is unusually heavy, verify insert layout and plate fit early.

Care and Maintenance

Clean with a damp cloth and mild soap. Also avoid harsh solvents. In addition, check fasteners on a set schedule, especially after moves. After each reset, let the feet settle so seams stay even.