CT2062 Precision Level Table Base

The FLAT Tech CT2062 is a Precision Level Table Base made for dining-height tabletops up to 30 × 36 inches. It features FLAT® Equalizers that automatically level and lock into position, ensuring a solid and stable setup for every dining room.

At a Glance

Type: Dining-height rectangular base. Spread: 22 inch × 30 inch. Column: 3 inch round. Mounting plate: 13 inch × 13 inch. Finish: Textured black. Leveling: FLAT Equalizers. Best for: Tabletops up to 30 × 36 inches.

Why Choose a Precision Level Table Base

This model is built for restaurants that need accuracy, speed, and dependable balance. The Equalizers adjust instantly as pressure is applied, keeping every tabletop flat and steady. Because the mechanism locks after leveling, staff can reposition tables quickly while guests enjoy a wobble-free experience.

Size and Compatibility

Base footprint: 22 inches × 30 inches
Column diameter: 3 inches
Mounting plate: 13 inch × 13 inch
Recommended tabletop: up to 30 inch × 36 inch

The Precision Level Table Base supports small to medium dining tabletops and rectangular shapes. Always confirm the bolt pattern on your top’s underside and match appropriate fasteners to the 13 × 13 inch mounting plate for proper alignment and strength.

Use Cases

Dining-height tables in casual and fine dining spaces
Compact restaurant layouts needing fast resets
Multi-table arrangements that require flush alignment

For alternate configurations, explore CT2063 for a similar footprint, or CT2056 for compact dining layouts. Compare with CT2087 and CT2089 for wider setups, or view CT2071 for a square-style base alternative.

Request More Info Now!

Installation and Setup Tips

Position the base under your tabletop and mark pilot holes for mounting. Then, drill using the correct bit for your top’s material. Secure the plate, stand the table upright, and press on each edge so the Equalizers engage with the floor. Finally, ensure all contact points are locked evenly before use.

Pro Tip

Keep the 13 × 13 inch plate centered over reinforced wood for stronger support. Doing so reduces vibration and keeps the tabletop secure through years of daily use.

Technical Specifications

Model: FLAT Tech CT2062 (KX2230 EQ)
Height: 28.35 inches (dining height)
Base spread: 22 inch × 30 inch
Top plate: 13 inch × 13 inch
Column: 3 inch round
Material: Cast iron
Finish: Textured black / powdercoat
Leveling system: FLAT Equalizers (manual adjustment)
Recommended top size: Up to 30 × 36 inches
Approx. base weight: 25 lb
Warranty: 2 years on Equalizers

Care and Maintenance

Clean with a mild detergent and soft cloth. Avoid strong solvents that can dull or weaken the finish. Inspect the Equalizer feet regularly and confirm they move smoothly. Lightly lubricate the threads if movement feels stiff or inconsistent.

Featured Answer

Why choose a Precision Level Table Base for dining-height tables?

A Precision Level Table Base keeps each tabletop even and secure, using Equalizers to remove wobble and improve comfort in high-traffic restaurant spaces.

Why Order From TimeWorn Wood

Pair CT2062 with our solid wood restaurant tabletops for a stable, handcrafted setup. Each top is built to order, pre-drilled for mounting, and finished with industry-grade coatings to perform through years of service.