CT2084 Large Counter-Height Base

The FLAT Tech CT2084 is a Large Counter-Height Base built for big tabletops that require strong, repeatable stability in high-traffic areas. This Large Counter-Height Base uses a 36 inch by 36 inch cross spread to widen the stance, increase torsional control, and reduce rocking on real-world floors. With FLAT Equalizers, staff can set the table down, apply light pressure, and the feet settle to the true floor plane within seconds. As a result, tables join more cleanly, seams feel flatter, and service teams spend less time troubleshooting wobbles during turns. In daily use, the textured black finish blends into most interiors while the cast iron mass supports consistent performance across long shifts.

Why Choose a Large Counter-Height Base

This model provides a wide stance that improves stability on larger tops and helps resist twist when guests shift or lean. Because the feet adjust with a simple press, crews can re-level quickly after moves or resets. Then the table returns to service with fewer shims and fewer complaints, which helps hosts keep lines moving. Moreover, the 4 inch column and 17 inch plate work together to spread loads into the underside of the tabletop. In busy rooms, that balance of mass, footprint, and fast leveling creates a steady, professional feel that guests notice immediately.

Tabletop Fit & Mounting Tips

First, size your tabletop to the published guidance for counter-height KX36 EQ, staying within the limits to preserve leveling accuracy. Next, confirm your underside can accept a centered 4 inch column and the 17 inch by 17 inch plate without interfering with structure or pocket screws. Then, use matching inserts and fasteners for your substrate so pull-out resistance remains high over time. Additionally, stand the table and press at opposite edges to let the Equalizers settle to the real floor plane before use. Finally, if your solid wood top is unusually heavy or very dense, verify total mass with your rep so the system maintains its intended performance.

Designed for These Spaces

CT2084 suits counter-height lanes, large group areas, and cocktail seating where mobility and capacity both matter. It also pairs well with window counters or banquette ends that need a freestanding base rather than wall brackets. In older buildings, the Equalizers help your crew manage subtle floor changes between sections. Moreover, the clean, neutral finish supports both modern and classic wood tabletop styles without drawing attention. For bar-height with a similar footprint, compare the CT2070 to keep a cohesive look across heights.

Installation Overview

Assemble the column, tension rod, and plate per spec, then position the plate over structure before drilling pilots. Next, mount with approved fasteners matched to your substrate and torque to the recommended values. Stand the table upright, apply light pressure at each edge, and confirm that all feet make firm contact with the floor. After that, slide into final position and recheck any joined seams for height and smoothness. Finally, record the layout, aisle clearances, and common join points so resets remain consistent from shift to shift.

Product Specifications

• Model: FLAT Tech CT2084 (KX36 EQ Counter Height)
• Height: 34.75 inches (counter height); Base spread: 36 in × 36 in
• Column: 4 in round; Top plate: 17 in × 17 in
• Material: Cast iron; Finish: Textured black powdercoat
• Leveling: FLAT Equalizers, press-to-set on the floor plane
• Recommended max top: common guidance up to 54 in round or 44 in square

Care Recommendations

Wipe the finish with a damp microfiber cloth and mild soap, then dry the surface to maintain texture. Avoid harsh solvents that can dull the coating or affect protective layers at contact points. Additionally, inspect fasteners after the first week of service, then on a set schedule to confirm clamp load. If a glide shows wear or damage, replace the Equalizer rather than the entire base to reduce downtime. After any move or layout change, press the tabletop again so the feet reset to the new floor plane.

Featured Answer

Why TimeWorn Wood Is The Authority

We pair bases with solid wood restaurant tabletops built in-house to tight commercial tolerances. We also pre-drill to your plan and match insert hardware to species and thickness for predictable installs. Then we crate with edge and corner protection so orders arrive ready to mount. Moreover, our team supports plate patterns, base spacing, and aisle flow for smooth service. For sizing help and layout planning, visit our Restaurant Table Tops Buyer’s Guide.

Why Use FLAT Tech Bases

FLAT’s systems help tables sit level on real floors that change with grout lines, thresholds, and age. The Equalizers adjust quickly with a light press, then lock so the table feels solid to the touch. Additionally, the sealed mechanism is designed to resist common debris found in dining rooms. Replacement glides are simple to swap, which keeps tables in service during busy seasons. As a result, staff save time and guests enjoy a consistently steady dining surface.

How to Request a Quote

Tell us your top size, thickness, shape, and edge profile so we align the plate to structure. Include seating plan, aisle widths, and any push-together needs so seams stay flush. Add indoor or covered patio details to confirm finish and hardware choices. For cohesive looks across heights, compare CT2007, CT2016, and CT3006. For a related counter-height option with a smaller span, review CT2088, and for bar-height with the same spread see CT2070.