ADA Table Base
The ADA Table Base by FLAT Tech, model CT7211, is a twin-pedestal steel design that delivers reliable balance for accessible dining spaces. This ADA Table Base maintains consistent height and wheelchair clearance while supporting rectangular tops up to 44 by 84 inches. Additionally, its Equalizers lock automatically for stability on uneven floors.
At a Glance
Type: Twin-pedestal dining base. Span: 30 in. Height: 28.35 in. Material: Powder-coated steel. Finish: Black. Leveling: FLAT Equalizers. Best for: Tops up to 44 in × 84 in and 99 lb.
Why ADA Table Base Stand Out
This model brings reliable stability and clear legroom for accessible layouts. Moreover, the Equalizers balance the feet as you press the top, removing shims and coasters. As a result, adjoining tables stay flush for smooth, seamless seating transitions.
Mounting Guidelines for Tabletops
- Secure each pedestal under structural support with proper fasteners.
- Verify total top weight remains within 99 pounds for leveling accuracy.
- Press on all corners after mounting so Equalizers engage and lock.
Following these steps helps maintain long-term performance and alignment. In addition, use our guide on ADA restaurant tabletops to confirm compliant spacing and knee clearance for your layout.
Pro Tip
Mark pilot holes before drilling. Even spacing across both pedestals distributes pressure evenly and keeps Equalizers level under load.
Where to Use This Base
- Accessible dining areas requiring open foot and knee space.
- Restaurants and cafés with rectangular or oval tabletops.
- Layouts that combine tables for larger group seating.
Because of its balanced twin design, guests experience fewer wobbles and smoother adjustments. Also, the durable finish blends with any décor and pairs perfectly with solid wood restaurant tabletops built for daily service.
Setup Instructions
First, assemble both pedestals and align them evenly before attaching. Next, mount under the tabletop and tighten each bolt with consistent torque. Finally, lower the table, press along each edge, and check that both ends rest flush with the floor.
Reminder
Do not forget to ask us to Pre-drill your Restaurant Tables. You will spend a few hundred dollars with us, or a few thousand dollars for installers to do it during install.
Key Measurements
- Model: FLAT Tech CT7211 (ATT30 EQ)
- Span: 30 in twin pedestals
- Overall Height: 28.35 in (dining/ADA height)
- Material: Powder-coated steel
- Finish: Textured black
- Weight: Approx. 29.8 lb
- Recommended Top: Up to 44 in × 84 in, 99 lb max
- Leveling System: FLAT Equalizers (pre-installed)
These proportions fit accessible tables while maintaining stability. Furthermore, the twin pedestals spread load evenly and reduce long-table flex. For extended spans, compare the 36-inch version CT7212.
Request More Info Now!
Cleaning Guidelines
Clean with mild detergent and water, then dry fully. Avoid harsh chemicals that may dull the surface or damage Equalizers. Additionally, check glides every few months and replace when wear affects smooth movement.
Featured Answer
Which Restaurant table bases work best for ADA layouts?
An ADA Table Base like FLAT Tech CT7211 offers clear wheelchair access, stability for large tops, and Equalizers that keep surfaces level during service.
About TimeWorn Wood Expertise
We produce solid wood restaurant tabletops designed for strength and daily use. Because we pre-drill mounting zones, installation is fast and consistent. In addition, our process and care and cleaning guides ensure dependable performance for years.
Did You Know?
ADA-compliant tables require a 27-inch minimum knee clearance. Twin-pedestal bases like CT7211 help achieve this while keeping table strength and balance.
Why Choose FLAT Tech
FLAT Tech bases use Equalizer glides that adjust instantly to uneven flooring. Moreover, they maintain equal height when tables join together. As a result, restaurants enjoy quicker setups and steadier tabletops during service.
How to Order
- Provide tabletop length, width, and material for review.
- Note ADA clearance requirements or seating layouts.
- Specify indoor or covered patio placement.
- Confirm preferred finish and installation details.
For related options, view CT2070, CT2020, or CT2085. You can also explore CT7212 for a larger twin version or browse all table bases from the TimeWorn homepage.
