Pin Leg Table Support
The Pin Leg Table Support adds essential strength for longer tabletops supported by wall-mounted cantilever bases. It keeps large tables level and prevents sag without cluttering floor space. Lightweight but strong, it fits neatly under the table and enhances stability for tops over 54 inches long. The design keeps a clean visual line while protecting the tabletop and wall mounts from stress and deflection.
What It Is
The JIPINLEG is a Pin Leg Table Support built to complement JI Bases’ wall-mounted cantilever systems. It pairs directly with models like the JICAT-15.5×21.5SM and JICAT-15.5×33LG. This compact leg mounts beneath the tabletop edge, resting on the floor to reduce strain on wall brackets. Because it relies on the cantilever base for height, it works with any standard dining or bar installation. The finish is a durable black textured powder coat that matches other JI Bases components for consistent design and performance.
At a Glance
Height 28.25″. Weight 2 lbs. 4″ × 4″ top plate. 1.25″ diameter steel column. 16-gauge welded steel. Black textured finish. Adjustable glide included.
Size & Compatibility
The Pin Leg Table Support is recommended for tabletops longer than 54 inches when used with wall-mounted cantilever bases. Its compact 4 × 4 inch plate and slim column give reliable strength without visual distraction. Pairing this accessory with the Large Cantilever Wall Mount Base spreads the load across the tabletop, reducing flex and keeping surfaces stable. Because it weighs only two pounds, installers can position and secure it easily while maintaining alignment with existing wall hardware.
Use Cases
Restaurants use the Pin Leg Table Support for long banquette runs, booths, and floating wall tables. It provides structure without visible bulk, preserving clean design and legroom for guests. In compact dining layouts, the leg works well with the Small Cantilever Base for shorter spans and adds reinforcement only where necessary. This scalable setup allows designers to standardize on one system while tailoring support levels for each tabletop length. The result is consistency across projects with fewer parts and easier maintenance.
Design Insight
Adding a single pin leg under longer tables keeps the floating look of a wall-mounted base while ensuring the tabletop remains solid under load.
Installation and Setup Tips
Install the Pin Leg Table Support directly under the tabletop overhang opposite the wall bracket. Position the top plate flush against the underside of the top and secure with suitable lag screws or threaded inserts. The adjustable plastic glide levels the table on uneven floors. When using multiple supports, align them with the cantilever mounts for even weight distribution. Verify that wall blocking and floor contact can handle the combined table and live load. This quick step ensures lasting balance and structural integrity for every table size.
Installation Reminder
Do not forget to ask us to Pre-drill your Restaurant Tables. You will spend a few hundred dollars with us, or a few thousand dollars for installers to do it during install.
Technical Specs
Model JIPINLEG: Height 28.25 inches. Weight 2 pounds. Top plate 4 × 4 inches, 16-gauge steel. Column 1.25-inch diameter steel tubing. Adjustable plastic glide included. Black textured powder coat finish. Designed as an accessory for JI Bases wall-mounted cantilever bases. Mounting hardware should be selected to suit tabletop material and layout.
Request More Info Now!
Care and Maintenance
Wipe down the Pin Leg Table Support using mild soap and warm water. Avoid acid-based or abrasive cleaners that may dull the finish. Keep the adjustable glide clean so leveling remains smooth. For scratches or marks, apply touch-up black enamel to maintain appearance. Periodically check fasteners to confirm tightness and replace worn glides as needed. Consistent care ensures the leg remains stable and keeps the installation looking polished over years of service.
Featured Answer
When should I use a Pin Leg Table Support?
Use this support when your wall-mounted cantilever base carries a tabletop longer than 54 inches. It prevents flex and gives subtle reinforcement without adding visual weight.
Options and Variants
The Pin Leg Table Support is a simple, single-size accessory. It’s most often used with the Large Cantilever Base for extended tables, though custom powder-coat finishes may be available on request. The adjustable plastic glide handles minor floor variations. For large rollouts, coordinate hole spacing and placement with the wall-mounted bases to simplify installation. Matching finishes and consistent geometry create professional results across multiple restaurant zones.
Why TimeWorn Wood Delivers Lasting Table Stability
TimeWorn specializes in building durable restaurant tabletops and structural supports that perform in daily service. Our tabletops pair with high-strength bases to deliver a seamless blend of function and design. Learn about our process to see how engineering and finish quality meet modern hospitality needs. Visit our restaurant tabletops and table bases pages to complete your next project with tested, commercial-grade craftsmanship.
Pro Tip
Use the same mounting template across all wall-mounted and pin-leg tables. Standard spacing saves time during installation and ensures uniform results.
Why Choose JI Pin Leg Systems
JI Bases manufactures precise, commercial-grade components trusted across the restaurant industry. Their wall-mount and pin-leg line provides reliable support for compact dining layouts and custom banquette builds. Each piece is welded, powder-coated, and designed for fast installation. This accessory allows builders to maintain the same durable performance while expanding layout possibilities. The system’s scalability makes it easy to adapt across restaurant chains, bars, or boutique hospitality spaces.
Start Your Quote Request
Provide your tabletop length, depth, and material type. Our team will confirm whether the Pin Leg Table Support fits your layout and suggest the correct number for each table. We can also pre-drill mounting holes for faster, safer setup. Begin your quote on our contact page and get expert help matching wall-mount and pin-leg systems for your restaurant project.
