CL2642281A Wall-Mount Cantilever Table Base

The FLAT Tech CL2642281A is a wall-mount, heavy-duty cantilever base that clears floor space and keeps booths and wall-side tables stable. For easy nightly cleanup and open leg room, this frame mounts to the wall so there is no center pedestal underfoot. The black powder-coated steel build stands up to daily service, and the 26 inch by 42 inch arm supports large tops when installed to a properly backed wall. Final height is set by your mounting location, so dining or bar installs are both possible.

Stability You Can Feel

Because the CL2642281A anchors to the wall, the tabletop resists drift during service and stays firm under load. Guests enjoy clear leg room and smooth seating, and staff can wipe the floor quickly without moving a pedestal. For wider spans or heavier tops, add a matching pin leg to support the front edge while keeping the open look that makes cantilevers popular. For layout ideas, see restaurant design trends.

Top Size and Compatibility

• Recommended top sizes: rectangles and ovals up to 38 × 54 inches
• Top materials: solid wood, composite, or stone with proper inserts
• Mounting: wall bracket; hardware selected for your substrate; tabletop screws sold separately

Mounting height sets the final table height. Install at standard dining height for booths, or mount higher for bar height. If you need extra front support, use the dining pin leg for seated installs or the bar pin leg for tall tops.

Where This Base Shines

• Booth runs and wall-side tables that need clear floor space
• Narrow aisles where pedestals would crowd chairs or cleaning
• Restaurants that want a clean, built-in look with easy access

For movable layouts, a freestanding base may be better. For fixed wall-side seating and quick cleanup, choose a cantilever.

Installation Notes

Mount to solid backing using anchors rated for your substrate. Verify bracket position, fastener spacing, and level before setting the top. For stone or solid-surface tops, use the manufacturer’s approved inserts. If a pin leg is specified, align it to the front edge after you set the cantilever height and pitch.

Specifications

• Model: FLAT Tech CL2642281A
• Style: Wall-mount cantilever table base
• Finish: Black powder coat
• Frame size: 26 in deep × 42 in wide
• Installed height: Set by mounting location
• Recommended top: Up to 38 × 54 inches
• Optional support: Dining pin leg (approx. 28 in) or bar pin leg (approx. 40 in)
• Hardware: Wall anchors and tabletop screws selected per substrate; sold separately

These specs fit most booth and wall-side layouts. They pair well with solid wood tops when inserts match your thickness and span.

Care and Maintenance

Check wall fasteners and tabletop screws on a schedule. Clean the powder-coated surface with a damp microfiber cloth and mild detergent. Avoid harsh solvents that may dull the finish. If a top is removed for service, tighten all mounting hardware to spec during reassembly.

Request more Info Now!

Other Table Base Options

Many floor plans mix base styles by top size, mobility, and stability. For that reason, compare these related models:

• FLAT Tech CL2636281A cantilever for mid-width wall-side tops
• FLAT Tech CL2036281A cantilever for smaller booth runs or tighter spans
• All restaurant table bases to browse by style and footprint
• FLAT Tech BD2802A bolt-down base for fixed floor plans and tight aisles
• CL2642281A specifications

---

Featured Answer

Why Order From TimeWorn Wood

Pair the CL2642281A with our solid wood restaurant tabletops. We size, pre-drill, and finish tops for daily commercial use, then crate and ship nationwide. We can also provide mounting templates and guidance on backing, inserts, and pin leg selection for your seating plan.

What to Include in Your Quote Request

• Top sizes, thickness, and edge profile for each table
• Wall substrate and backing details for mounting
• Target height (dining or bar) and overhang
• Whether a front pin leg is required and where
• Any ADA clearance or aisle constraints in the run